0.4 mm PMIC -- Series MIC2870 16 Pin 2MHz 16-UFQFN Exposed Pad
As a result of its 16-UFQFN Exposed Pad package, it helps to save board space on the board. It has 2 outputs for LED drivers.We are using Surface Mount as the mounting method.With high efficiency, it emerges as a DC DC Regulator.It is possible for the led driver ic to function normally at -40°C~125°C TJ.It is clear that Camera Flash will benefit from the program.Using the frequency of 2MHz, it operates.The base is configured with 16 pins.If the voltage supply is lower than 2.7V, undetermined failures may occur.There are 2 segments in it.This is mounted by Surface Mount.You can find this LED driver under the base part number MIC2870.5V is an acceptable maximum value for the supply voltage.The output voltage of the device is 5.2V.There are 16 pins on this device.This model is designed to offer 5V as its maximum supply voltage.In addition, it can also be categorized into Driver ICs based on its characteristics.When the supply current should be less than 4.2mA, the device will provide high efficiency.For stable operation, it is recommended that the operating temperature not exceed 125°C.1.5A is the maximum current the load can handle.In order to maintain stable operation, a temperature greater than -40°C is essential.The LED driver belonging to the -- series has many applications.There's an interface IC marked with LED DISPLAY DRIVER on this part.A total of 2 channels are currently available for transmission.