Fixed 0.5 mm PMIC -- Series MIC2810 16 Pin 2MHz 16-VFQFN, 16-MLF®
In order to make voltage regulators' voltage regulators' transportation easier, it is packaged in 16-VFQFN, 16-MLF®.Shipped in a Tape & Reel (TR) package.As a whole, voltage regulator supports 3 outputs.For optimal performance, the operating temperature should be set to -40°C~85°C.Find more pin-to-pin solutions for your special needs by searching MIC2810.Its pinout starts at 16 pins.In order to relow solder, it is necessary to allow the temperature to peak 260.Pins are arranged in a 16 pattern in this voltage regulator.This regulator voltage can be used in a wide range of applications due to its 1.2, 2.8, 3.3 V output voltage.Regulator controller with Fixed output.The DC DC Switching Regulator should be displaying 0.3 A as its current output.There is a quiescent current of 120μA displayed by the regulator controller.In order for it to operate, it will require at least 2.7 V.The voltage regulator DC to DC and other PMIC - Power Management ICs are important in the industry.This harley voltage regulator is included in the 16-MLF® (4x4) package.Surface Mount-axis for mounting to PCBs and other boards.Voltages higher than 5.5 V are not supposed to be fed to the voltage regulator DC to DC.To maintain quality, 2 channels of the voltage regulator work together.It can't be used at temperatures lower than -40°C.The use of this harley voltage regulator is not recommended at temperatures above 85°C.There is a voltage regulator 12v from -- used in this voltage regulator 12v.