MIC2791 Voltage supervisor -- Series Min 1.5V Max 5.5V
Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. The purpose of this IC power is to provide you with a reference of 6-UFDFN Exposed Pad functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The power management belongs to the PMIC - Power Management ICs subcategory. 6 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.5V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TJ. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 50μA volt supply current. There are other types of IC included in the power managment ic, such as types POWER SUPPLY SUPPORT CIRCUIT. To find similar IC managements from the manufacturer, you can always search by MIC2791. As you can see, this IC power comes from the well-known -- series of products. The power management has 1 monitored inputs. The power management has 6 terminals.