6-Pin MIC2790 Voltage supervisor -- Series Min 1.5V Max 5.5V
There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. To assist you, this PMIC includes SOT-23-6 Thin, TSOT-23-6 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a PMIC - Power Management ICs chip. It has a total of 6 pins that are attached to IC management. This power management has 6 pins. Supply voltage (Vsup) should be at least 1.5V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 50μA supply current present in the power management. It also contains ICs of other kinds, such as POWER SUPPLY SUPPORT CIRCUIT, which are included in the power management. A similar IC managements number of the manufacturer can always be found by using MIC2790, the base power ics number. A power supply of 3.3 V watts is required for the operation of this power management. A PMIC from the well-known -- series of products is being offered here. On the supervisor, a total of 1 inputs are monitored as IC management of its monitoring system. There are 6 terminals on the voltage supervisor.