5-Pin MIC2776 Voltage supervisor -- Series 1 Channels Min 1.5V Max 5.5V

This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. There is a subcategory of this power ic known as PMIC - Power Management ICs. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.5V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Complementary. It is estimated that the voltage supervisor's supply current is 3 uA. In addition, IC management are other features such as [0], to mention only a few. There are also other types of integrated circuits included in the supervisor, like POWER SUPPLY SUPPORT CIRCUIT. It is always advisable to use MIC2776, the base supervisor number, when searching for similar PMICs from the manufacturer. As you may know, this PMIC comes from the well-known -- series product line. On the power management, there are 5 terminals.