5-Pin MIC2774 Voltage supervisor -- Series 2 Channels Min 1.5V Max 5.5V

Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 2 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 2. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as PMIC - Power Management ICs. In total, IC powers are 5 pins on the board. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.5V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Complementary from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 3.5 uA. The other features include, for example, [0], which is just one example. It is also possible to use other types of IC, such as POWER SUPPLY SUPPORT CIRCUIT, in this supervisor. If you want to search for similar IC managements of this manufacturer, you can always refer to MIC2774, which is the base power ics number. Supervisors from the well-known -- series product line are featured in this PMIC. There are 1 elements to this supervisor, which can be used in a variety of applications. The power management has 5 terminals in total.