28 Terminals 4.5V 28-Pin MIC26903 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 600kHz Tape & Reel (TR) 9A 28-PowerVQFN

It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. During the development of this harley voltage regulator, 28 terminations were made. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 28-PowerVQFN package to save space. The voltage regulator is configured with 1 outputs. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. DC-DC switching regulators reach 600kHz switching frequencies. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.8V. Featuring a 9A output current, dc to dc voltage regulator offers maximum design flexibility. There is a voltage regulator maximum input voltage of 28V. For operation, voltage regulator provides a nominal input voltage of 12V. The regulator voltage that you are looking at belongs to the subcategory PMIC - Power Management ICs. There is a DC/DC regulator in this family that belongs to the MIC26903 family. At 600 mV to 5.5 V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 28 pins are required. The output voltage of this voltage regulator 12v should at least be set at 800mV volts at all times. Accordingly, dc to dc voltage regulator's maximum output current is 9A A. By using 5.5V as the maximum output voltage, adjusting voltage regulator is easy to operate. There is a maximum frequency of switching for this adjusting voltage regulator, which is 750 kHz. A maximum voltage of 5.5V can be obtained from the regulator voltage. As the name implies, this voltage regulator belongs to the HyperLight Load®, SuperSwitcher IIG™ family of voltage regulators, and it is a type of switching DC-DC regulator. Switching regulators such as this operate from voltages of 2.7, 5.5 V. Voltage regulator consumes 730 uA A of quiescent current without being affected by outside forces. Adding the ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.5V feature improves this switching regulator's efficiency and stability. DC-DC switching regulator with 28 pins. A switching frequency of 600 kHz can improve reliability. Normal output current of DC DC switching regulator is 9 A.