Tube Active 1 Surface Mount Hot Swap Controllers 2mA mA Latched Fault 8-SOIC (0.154, 3.90mm Width) 1 General Purpose Hot Swap Controller

You get it with the 8-SOIC (0.154, 3.90mm Width) package.Currently, 1 channels can be accessed.Hot-swappable device comes in the shape of a Tube.Device DUAL is in the terminal position.Total number of pins is 8.The way it's set up is the way Surface Mount wants it.In electrical components, Hot Swap Controller is the classification.If you want reliable performance, you should set the temperature to -40°C~85°C.Hot-swappable device has General Purpose applications.There is a reference to it in Latched Fault.If the power source is 10V~80VV, it should work fine.Hot-swappable device is included in the MIC2587 family of numbers.Operating the device requires 8 pins.PMIC - Power Management ICs contains this gadget on its own.Current Limit, Fault Timeout, Slew Rate, UVLO features are programmable.Presently, 2mA is in short supply.There is a Surface Mount-axis orientation to it.Stable operation can be achieved with a maximum operating temperature of 85°C°C.Hot-swappable device operates at a minimum temperature of -40°C degrees Celsius in order to ensure reliabilHot-swappable devicey.To ensure normal operation, the supply voltage (Vsup) must be kept above 10 V.80 V is set for Vsup (maximum supply voltage).An analog IC, POWER SUPPLY SUPPORT CIRCUIT in this instance, is used for this gadget.Hot Swap is defaulted to output 1.There is a maximum supply voltage of 80VV that it can handle.Device output is --V at its maximum.Low supply voltages, such as 10VV, are possible.Hot Swap is 2mA that operates the supply current.Part of the -- series, this electrical component is made of copper.