Tube Obsolete 1 Surface Mount Hot Swap Controllers 2mA mA Latched Fault 14-SOIC (0.154, 3.90mm Width) 1 General Purpose Hot Swap Controller, Sequencer
There is a 14-SOIC (0.154, 3.90mm Width) package that includes this.At the moment, there are 1 channels available.The package resembles a Tube.There is a DUAL terminal position on the device.A total of 14 pins are present on it.This is set up in the same way as Surface Mount.Hot-swappable device is classified as a Hot Swap Controller, Sequencer electrical component.A temperature setting of -40°C~85°C will ensure reliable operation.General Purpose applications can be downloaded from the device.The article is featured in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a 10V~80VV power source.Numbers in the MIC2586 family include it.There is nothing else in Power Management Circuits but this gadget.Among its programmable features are Current Limit, Fault Timeout, Slew Rate, UVLO.There is currently an adequate supply of 2mA.For normal operation, Vsup should be maintained above 10 V.In the Vsup (maximum supply voltage) setting, 80 V is selected.Hot-swappable device is 10/80 V type power supplies that are used in this part.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this gadget.During operation, it can supply a maximum current of 5 mA.There is a maximum output of --V from the device.A ALSO OPERATES WITH A NOMINAL +48V can also be produced with the help of this device.A -- series electrical component is used in this application.