MIC2585-1MYTS-TR Overview

This is included in the 24-TSSOP (0.173, 4.40mm Width) package.At present, 2 channels are available.It's packaged in a Tape & Reel (TR) shape.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, Sequencer.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Latched Fault, it's featured.The device should be able to be powered by a 1V~13.2VV power source.There are numbers in the MIC2585 family that include it.24 pins are used in operation.There are Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.In the present, there is a shortage of 1.7mA.Positioned in direction of Surface Mount, it is at a right angle.Operating at 85°C°C ensures stable performance.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.There is a supply current of 1.7mA.

MIC2585-1MYTS-TR Features

Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO

MIC2585-1MYTS-TR Applications

There are a lot of Microchip Technology
MIC2585-1MYTS-TR hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies