MIC2580A-1.6BTS Overview

In the 24-TSSOP (0.173, 4.40mm Width) package you will find it.Channel 4 is currently available.A Tube-shaped package holds it.The 24 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 24 pins.The supply voltage 3.3V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Switching Regulator.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for CompactPCI™, PCI are available on the device.A feature of Latched Fault, Thermal Limit describes it.Using a 3.3V 5V ±12VV power source should be able to power the device.Hot-swappable device has Current Limit, Fault Timeout, Slew Rate programmable features.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3.125V so that the device can function normally.Vsup is set to 3.5V, the maximum supply voltage.With the help of this device, ALSO OPERATES ON +/-12V AND 5 VOLT SUPPLY can also be produced.

MIC2580A-1.6BTS Features

The terminal position of 24
Features of Latched Fault, Thermal Limit
Programmable features of Current Limit, Fault Timeout, Slew Rate

MIC2580A-1.6BTS Applications

There are a lot of Rochester Electronics, LLC
MIC2580A-1.6BTS hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems