MIC2568-0BTS-TR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 28-TSSOP (0.173, 4.40mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 4 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The MIC2568 family consists of this type.It consists of 1 functions.In terms of output, the lighting driver can provide a maximum of 120mA V.A total of 28 pins are included in this LED driver.There is an electrical component included in the -- series.The LED driver is configured with a maximum supply voltage of 5.5 V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3 V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 1 channels available.As a result of using this lighting driver, ALSO OPERATE FROM 4.5 TO 5.5V can also be produced.
MIC2568-0BTS-TR Features
1 channels
Additional features like ALSO OPERATE FROM 4.5 TO 5.5V
MIC2568-0BTS-TR Applications
There are a lot of Microchip Technology
MIC2568-0BTS-TR Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards