MIC2564A-0BSM-TR Overview

It is packaged in the form of a Tape & Reel (TR).It is included with the 24-SSOP (0.209, 5.30mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 4 outputs that are available for use.With a supply voltage of --, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the MIC2564A family.It is important to note that the LED driving board has 2 functions.From the lighting driver, there is a maximum output of 120mAV.It is included in the -- series.The maximum supply voltage for this lighting driver is set to 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3 V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.In addition, OPTIONAL SUPPLY OF 12V AND 5V CAN BE USED can be produced using this LED driving board.

MIC2564A-0BSM-TR Features

1 channels
Additional features like OPTIONAL SUPPLY OF 12V AND 5V CAN BE USED

MIC2564A-0BSM-TR Applications

There are a lot of Microchip Technology
MIC2564A-0BSM-TR Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD