N-Channel 1.27 mm PMIC -- Series MIC2561 14 Pin 14-SOIC (0.154, 3.90mm Width)
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 14-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.A PCMCIA Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to 0°C~70°C TA.The LED driver is equipped with 2 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Status Flag features.It comes under the family of MIC2561.The operation is performed through the 14 pins.Currently, the lighting driver has a total of 1 functions.There is a maximum output of 200mAV from the LED driver.This operation requires the maximum output current to be decreased to 200mA.It is part of the -- series.As a result, the output current is set to 750mA.A self-contained econtainer holding Switch ICs capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 5 V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.8 V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.It is recommended to set the supply voltage to 15V for optimum efficiency.It is suitable for stable operation to operate at a maximum temperature of 70°C°C.To ensure reliability, the unit operates at a temperature of 0°C degrees Celsius.It has a maximum current requirement of 100μA.It has a maximum supply current of 0.1 mA.