MIC2549A-2BN Overview
The LED driver's packaged as a Tube.The 8-DIP (0.300, 7.62mm) package contains it.Through Hole is the mounting type of the LED driver.The switch type is USB Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.It contains 8 terminations.The LED driver has 1 functions.Its maximum output voltage is 3AV.A supply voltage of 5V leads to high efficiency.There are 8 pins in total on this board.The maximum supply voltage is set to 5.5V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.
MIC2549A-2BN Features
Supplied from 5V
MIC2549A-2BN Applications
There are a lot of Rochester Electronics, LLC
MIC2549A-2BN Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power