MIC2548-2YMM-TR Overview
A Tape & Reel (TR) is used to package it.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.The LED driver is mounted as Surface Mount.USB Switch is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It is a member of the MIC2548 family.The operation is carried out using the 8 pins.As far as the lighting driver is concerned, there are 1 functions.In this case, the LED driving board can produce only 1.5AV as its maximum output.The maximum output current is reduced to 1.5A to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 8 pins.This electrical component is part of the -- series.This case has the output current set to 500 mA.There is a Switch ICs capacity container for this LED driver that is self-contained.A supply voltage of 2.7 V to 5.5 V is recommended for maximum efficiency.For stable operation, the maximum operating temperature is 85°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is the type of interface to the LED driver.For this electrical component, High Side is the classification.
MIC2548-2YMM-TR Features
MIC2548-2YMM-TR Applications
There are a lot of Microchip Technology
MIC2548-2YMM-TR Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives