N-Channel 1.27 mm PMIC -- Series MIC2546 3.3V 16-SOIC (0.154, 3.90mm Width)
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 16-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the MIC2546 family.As a result, there are 16 terminations.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 1.5A volts.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.These electrical components are part of the -- series.When this is the case, the output current is set to 1.5 A.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 5.5V (Vsup).Optimal efficiency requires a voltage of 2.7 V to 5.5 V.A maximum operating temperature of 85 °C°C is required to provide stable operation.A minimum working temperature of -40 °C degrees Celsius is required to ensure its reliability.Interface type BUFFER OR INVERTER BASED PERIPHERAL DRIVER is used for this LED driving board.Electrical components classified as High Side Adjustable Current Limit are included in this category.