N-Channel 1.27 mm PMIC -- Series MIC2545A 8 Pin 8-SOIC (0.154, 3.90mm Width)
The package is in the form of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.USB Switch is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is part of the MIC2545A family of LED drivers.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.3AV is the maximum output of the LED driver.This results in the maximum output current dropping to 3A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.A total of 8 pins are present on it.Lighting drivers with 35mOhm resistance are used.A component of this type is included in the -- series.This case results in a 500 mA output current.A container with a capacity of Switch ICs contains this self-contained lighting driver.You can select from 1 channels.When using this LED driving board, it is recommended that the supply voltage is set to 2.7 V to 5.5 V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 2.7V volts.Stable operation is possible with a maximum operating temperature of 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It is possible to use a voltage as low as 2.7V V as a power supply voltage.There is a type BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface to the LED driving board.Electrical components classified as High Side belong to this category.