N-Channel 1.27 mm PMIC -- Series MIC2544A 8 Pin 8-SOIC (0.154, 3.90mm Width)

It is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.As you can see, it comes from the MIC2544A family.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.From the lighting driver, there is a maximum output of 1.5AV.To comply with the operation criteria, the maximum output current is reduced to 1.5A.Surface Mount is mounted in the way of this LED driving board.It is included in the -- series.The LED driver is packaged in an econtainer with a capacity of Switch ICs.For maximum efficiency, the supply voltage should be set to 2.7 V to 5.5 V.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.Currently, the interface type of the lighting driver is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.In this case, the electrical component is classified as High Side Adjustable Current Limit.