N-Channel 0.65 mm PMIC - Series MIC2544A 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the MIC2544A family.In order to operate, 8 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 1.5A volts.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.These electrical components are part of the - series.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.Optimal efficiency requires a voltage of 2.7 V to 5.5 V.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.Interface type BUFFER OR INVERTER BASED PERIPHERAL DRIVER is used for this LED driving board.Electrical components classified as High Side are included in this category.