MIC2544-1YMM-TR Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the MIC2544 family.In order to operate, 8 pins are used.This lighting driver is capable of delivering a maximum output of 1.5A volts.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.It has 120mOhm resistance.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It can operate at 2.7V volts as well.

MIC2544-1YMM-TR Features

Resistance of 120mOhm

MIC2544-1YMM-TR Applications

There are a lot of Microchip Technology
MIC2544-1YMM-TR Power Switches ICs applications.

• Storage Drives
• Portable/Handheld Devices
• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards