N-Channel 1.27mm PMIC -- Series MIC2537 16 Pin 5V 16-SOIC (0.154, 3.90mm Width)

As a result, it is packaged in the form of a Tube.This package is included in 16-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.A USB Switch switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 4 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled, Status Flag features.It comes under the family of MIC2537.A total of 16 terminations have been recorded.The operation is performed through the 16 pins.Currently, the lighting driver has a total of 1 functions.There is a maximum output of 100mAV from the LED driver.This operation requires the maximum output current to be decreased to 100mA.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.Currently, the LED driving board has 700mOhm resistance.It is part of the -- series.As a result, the output current is set to 100 mA.A self-contained econtainer holding Switch ICs capacity contains this lighting driver.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 4 channels available.It is recommended to set the supply voltage to 3 V to 5.5 V for optimum efficiency.It is suitable for stable operation to operate at a maximum temperature of 85 °C°C.To ensure reliability, the unit operates at a temperature of -40 °C degrees Celsius.There is a maximum supply voltage of 5.5 VV that it is capable of handling.Alternatively, 3 V volts can be used if needed.A classification of High Side is assigned to this electrical component.