N-Channel 0.65mm PMIC -- Series MIC2536 8 Pin 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
As you can see, it's packaged in the way of a Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 2 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2536 family.As a result, there are 8 terminations.In order to operate, 8 pins are used.It contains 2 functions.This lighting driver is capable of delivering a maximum output of 150mA volts.It is necessary to reduce the maximum output current to 150mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.It has 700mOhm resistance.These electrical components are part of the -- series.When this is the case, the output current is set to 100 mA.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 5.5V (Vsup).Optimal efficiency requires a voltage of 2.7 V to 5.5 V.Interface type BUFFER OR INVERTER BASED PERIPHERAL DRIVER is used for this LED driving board.Electrical components classified as High Side are included in this category.