MIC2536-1YMM Overview

It is packaged in the form of a Tube.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is USB Switch.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.As you can see, it comes from the MIC2536 family.A total of 8 terminations can be found in it.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 150mA.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.In this case, there is 700mOhm resistance in the LED driving board.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.

MIC2536-1YMM Features

Supplied from 5V
Resistance of 700mOhm
2 channels

MIC2536-1YMM Applications

There are a lot of Microchip Technology
MIC2536-1YMM Power Switches ICs applications.

• Wireless/Networking Cards
• Low Voltage I/O System Power
• Hard Disk Drives
• Solid-State Drives
• Hot Swap
• HDD and SSD
• Hot Swap
• Wireless Modem Data Cards
• PC Cards
• HDD, SSD