MIC2506BM-TR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Slew Rate Controlled, Status Flag features.The MIC2506 family consists of this type.It consists of 1 functions.In terms of output, the lighting driver can provide a maximum of 1A V.A total of 8 pins are included in this LED driver.There is an electrical component included in the - series.The LED driver is configured with a maximum supply voltage of 7.5 V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 2.7 V.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, there are 2 channels available.
MIC2506BM-TR Features
2 channels
MIC2506BM-TR Applications
There are a lot of Microchip Technology
MIC2506BM-TR Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards