N-Channel 1.27 mm PMIC -- Series MIC2505 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)
As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2505 family.As a result, there are 8 terminations.In order to operate, 8 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 2A volts.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.It has 75mOhm resistance.These electrical components are part of the -- series.Self-contained in an econtainer with a capacity of Switch ICs, this LED driver is self-contained.The maximum supply voltage for this LED driver is 7.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7 V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.Optimal efficiency requires a voltage of 3 V to 7.5 V.The maximum input voltage is 7.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.Electrical components classified as High Side are included in this category.