10 Terminals 2.7V 10-Pin MIC23250 DC DC Voltage Regulator SWITCHING REGULATOR 2 Outputs 4MHz Tape & Reel (TR) 400mA 10-UFDFN Exposed Pad, 10-TMLF®
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. In this voltage regulator, there are 10 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. Space savings are achieved by placing this voltage regulator in the 10-UFDFN Exposed Pad, 10-TMLF® package. There are 2 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Fixed output. There is a switching regulator that is compatible with the Surface Mount mounting. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. There is a switching frequency of 4MHz for this voltage regulator 12v. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage (Min/Fixed) of this voltage regulator 12v is 1.2V 2.8V. This voltage regulator 12v offers maximum design flexibility with an output current of 400mA. The maximum input voltage of this voltage regulator 12v is 5.5V. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. Listed under the subcategory of PMIC - Power Management ICs is this voltage regulator 12v. As part of the MIC23250 series of regulators, the voltage regulators can be found. The switching regulator operation is carried out by 10 pins. In order for this switching regulator to work properly, the output voltage should be at least 2.8VV. On the basis of the maximum output voltage of --, adjusting voltage regulator can be operated easily. Using the maximum switching frequency of 4000 kHz, this harley voltage regulator operates at its maximum efficiency. This 12 volt voltage regulator can output 1 A A at its top. The switching DC-DC regulator belongs to the HyperLight Load® family of electronic voltage regulator 12vs. Switching regulators operate at 2.7, 5.5 V supply voltages. A high maximum operating temperature 125 °C ensures stable operation of switching regulator. In order to ensure DC DC switching regulator's reliability, it operates at the minimum operating temperature of -40 °C. The dc to dc voltage regulator's minimum input voltage that DC DC switching regulator can handle is 2.7 V volts. An output voltage of 5.5 V is maximum for this voltage regulator 12v. Switching regulator with 10 pins for DC-DC power. Using 4 MHz as the adjusting voltage regulator's switching frequency can improve reliability. 0.4 A is normally the output current ofDC DC switching regulator.