10 Terminals 2.7V 10-Pin MIC23201 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 2MHz Cut Tape (CT) 2A 10-VFQFN Exposed Pad, 10-MLF®

A Cut Tape (CT) package is used in this voltage regulator to optimize performance. In this voltage regulator, 10 terminations are present. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. In order to save space, this voltage regulator is packaged in the 10-VFQFN Exposed Pad, 10-MLF® package. 1 outputs of voltage regulator are configured. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. A DC-DC switching regulator such as this one switches at 2MHz. Voltage regulators like this one can operate at least with 2.7V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.95V. This voltage regulator 12v features maximum design flexibility thanks to its 2A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 5.5V. An input voltage of 3.3V is required to meet the requirements of the switching regulator operation. As a member of the MIC23201 family of DC/DC regulators, this is a DC/DC regulator. The voltage DC DC switching regulator can provide is up to 3.6V volts. During switching regulator operation, 10 pins are used. Ideally this switch regulator should have an output voltage of about 950mV at the very least. The maximal output voltage of 3.6V allows adjusting voltage regulator for simple operation. In order for this harley voltage regulator to function properly, it has a maximum switching frequency of 2000 kHz. DC DC switching regulator offers a maximum output voltage of 3.6V as its maximum output voltage. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the Hyper Speed Control® family.