2.7V 16-Pin MIC23156 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 3MHz Tape & Reel (TR) 1.5A 16-UFBGA, WLCSP
For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. In order to save space, this harley voltage regulator is available in the 16-UFBGA, WLCSP package. There are 1 outputs configured on this voltage regulator 12v. There are output pins on this DC DC switching regulator that generate Programmable output. Surface Mount-mounting is compatible with this switching regulator. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. This DC-DC switching regulator has a switching frequency of 3MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 2.7V. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 0.7V. It features maximum design flexibility due to dc to dc voltage regulator's 1.5A output current. Voltage regulator has a maximum input voltage of 5.5V. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 3.6 V. There is a subcategory called PMIC - Power Management ICs that includes this voltage regulator. The MIC23156 family of DC/DC regulators includes this DC/DC regulator. The voltage DC DC switching regulator can produce is 2.4V volts. There are 16 pins that are used for the operation of the voltage regulator 12v. There should be at least a 700mV volt output voltage for this switching regulator in order to make it work properly. Based on the maximal adjusting voltage regulator's output voltage of 2.4V, adjusting voltage regulator can be operated easily. As the name suggests, this regulator operates at the maximum switching frequency of 3000 kHz. The maximum output voltage of this regulator voltage is 2.4V. It is possible for the switching voltage regulators to produce an output current of 1.5 A A at its maximum. As a member of the HyperLight Load® family of DC/DC regulators, this part is prominent in many specifications. 2.7, 5.5 V is the supply voltage for this DC-DC switching regulator. A dc to dc voltage regulator's dc to dc voltage regulator's minimum supply voltage of 2.7V V ensures reliable performance. The high-limit maximum operating temperature 125°C allows harley voltage regulator stable operation. To ensure reliability, harley voltage regulator operates at a minimum operating temperature of -40°C. Input voltages as low as 2.7V can be used for DC DC switching regulator. It is designed to sustain a dc to dc voltage regulator's maximum 5.5V input voltage. There are 16 pins on this DC-DC switching regulator. A supply current of 30μAmps is required to operate this DC-DC switching regulator. Voltage regulator 3 MHz switching frequency can improve reliability. Normally, 1.5 A is the output current of adjusting voltage regulator.