2.7V 8-Pin MIC23051 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 4MHz Tape & Reel (TR) 600mA 8-VFDFN Exposed Pad, 8-MLF®

optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving 8-VFDFN Exposed Pad, 8-MLF® package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. The adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. This voltage regulator 12v reaches a switching frequency of 4MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.7V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.2V. A maximum design flexibility is provided by the 600mA output current of voltage regulator. There is a maximum input voltage of 5.5V for this voltage regulator 12v. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6 V for operation. In terms of category, this voltage regulator 12v falls into the PMIC - Power Management ICs category. In the particular voltage regulators, the MIC23051 family is represented. There are 8 pins used for switching regulator operation. For this switching regulator, we recommend keeping the output voltage at at least 1.2V volts. A 600mA A maximum output current is required to meet the switching regulator operation requirements. By using the --'s maximal output voltage, adjusting voltage regulator can operate easily. It is operated at the maximal switching frequency of 4600 kHz when this harley voltage regulator is operating. As much as 0.6 A A can be output by the voltage regulators at the top. In the HyperLight Load® family, this part palys an important role in DC DC switching regulator's traget applications. With 2.7, 5.5 V as the supply voltage, this DC-DC switching regulator will operate. By adding the ALSO HAS PFM CONTROL TECHNIQUE feature, this harley voltage regulator is more efficient and stable. This voltage regulator allows stable operation due to its high maximum operating temperature 125°C. Reliability is ensured at minimum DC DC switching regulator's operating temperatures of -40°C. With regard to the input voltage, it is compatible with a minimum voltage of 2.7V. 5.5V input voltage is supported at its maximum by this voltage regulator 12v. With 8 pins, this voltage regulator is equipped with a number of features. Normally, 0.6 A of DC DC switching regulator current are output.