MIC2298-15YML-TR Overview

Using its 12-VFDFN Exposed Pad, 12-MLF® package, it is possible to save board space. LED drivers design with 1 outputs.This mounting method is Surface Mount.The system emerges as a DC DC Regulator with high efficiency.It is capable of working normally at -40°C~125°C TJ.Camera Flash has considerable advantages.A frequency of 1MHz is used to operate it.This configuration is built upon 12 pins.It is possible that failures will occur if the voltage supply is below 2.5V.2 segments are present.The mount is in the way of Surface Mount.The LED driver is available under the part number MIC2298.There is no maximum value acceptable for the supply voltage, so 10V is acceptable.Its output voltage is 15V.The voltage range of this device is optimized for a maximum supply voltage of 10V.In addition to Driver ICs, it is also classified by its characteristics.With 2.5V as the minimal input voltage, it operates.A minimal supply voltage of 2.5V is required for it to achieve the highest efficiency.The maximum supply current is 10V.The operating temperature should not exceed 125°C to ensure stable operation.4.75A is the maximum amount of current that can be supplied to the load.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.LED drivers belonging to the series -- are important components in a wide range of applications.There is no external factor that can consume current, so 15mA current is consumed.IC LED DISPLAY DRIVER is used on this part as an interface IC.This device produces a voltage of 15 V as its output.Transmissions are currently available on 1 Channel channels.

MIC2298-15YML-TR Features

Available in the 12-VFDFN Exposed Pad, 12-MLF® package
Operating temperature of -40°C~125°C TJ
Frequency of 1MHz
Switching frequency of 1MHz
Output voltage of 15 V

MIC2298-15YML-TR Applications

There are a lot of Microchip Technology
MIC2298-15YML-TR LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights