MIC2297-42YML-TR Overview
In order to save board space, the 10-VFDFN Exposed Pad, 10-MLF® package is used. A LED driver using this design has 1 outputs.As a mounting method, Surface Mount is used.It emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.The system operates at a frequency of 600kHz.A configuration of this chip is made up of 10 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.5V.A total of 10 segments have been created.It's mounted in Surface Mount.Part number MIC2297 represents this LED driver.It is acceptable to supply voltages of 10V.A maximum voltage of 10V is optimized for use by this device.With a minimum input voltage of 2.5V volts, it can operate.For highest efficiency, it works with a minimal supply voltage of 2.5V.In terms of supply current, 10V is the maximum value.Temperatures above 125°C should not be allowed to exceed operating temperatures in order to ensure stable operation.Loads can only be powered by 1.2A current.Stable operation requires a temperature higher than -40°C.As long as the switching frequency is maintained at 600kHz, this electronic component is able to perform all of its functions properly.A 40V voltage is output by it.There are currently 1 channels available for transmission.
MIC2297-42YML-TR Features
Available in the 10-VFDFN Exposed Pad, 10-MLF® package
Operating temperature of -40°C~125°C TJ
Frequency of 600kHz
Switching frequency of 600kHz
Output voltage of 40V
MIC2297-42YML-TR Applications
There are a lot of Microchip Technology
MIC2297-42YML-TR LED Driver ICs applications.
- Portable lighting
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps