MIC2289-34YML-TR Overview
There is also a 8-VFDFN Exposed Pad, 8-MLF® package that is used to save space on the board. Using this LED driver, there are 1 outputs.As far as mounting is concerned, Surface Mount is adopted.DC DC Regulator emerges with high efficiency and reliability.If the led driver ic is set to -40°C~125°C TJ, it will work normally.Backlight has many advantages.It operates on the basis of the frequency of 1.2MHz.This LED driver is configured with a base of 8 pins.If the voltage supply is below 2.5V, undetermined failures may occur.It's mounted by Surface Mount.Under the base part number MIC2289, you will find this LED driver.Ideally, the supply voltage should be 10V.It produces a voltage of 34V volts.An optimized supply voltage of 10V is provided.It operates at a voltage of 2.5V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 2.5V.Supply current cannot exceed 10V.Temperatures should not exceed 125°C in order to ensure stable operation.There is no current available to supply to the load.Maintaining a temperature above -40°C is essential for stabilizing operation.It is currently possible to transmit over 1 channels.
MIC2289-34YML-TR Features
Available in the 8-VFDFN Exposed Pad, 8-MLF® package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
MIC2289-34YML-TR Applications
There are a lot of Microchip Technology
MIC2289-34YML-TR LED Driver ICs applications.
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices