Enable, Power On Reset Fixed 0.5 mm MIC2214 PMIC -- Series 10 10-VFDFN Exposed Pad, 10-MLF®
Deliveries are in Tape & Reel (TR) cases. The package is in a 10-VFDFN Exposed Pad, 10-MLF® case. In this case, Fixed represents the output type of the Voltage Regulated IC. This part implements 2 regulator ICs, which can be found in the following table. Regulator IC varies the range of Surface Mount operating temperatures. The Voltage Regulated IC operates at a temperature of -40°C~125°C degrees, which is its operating temperature. It is configured for output function Positive on this regulator. There is an output current of 150mA, 300mA on this regulator. The total number of pins in the regulator is 10. This IC regulator has a total of 2 outputs, which ensures a rapid, adequate performance when in use. There is a voltage dropout of 10 volts for this IC regulator. Several pins on the chip are 10-shaped. As an FYI, this IC voltage regulator has the basic part number MIC2214. An example of this type of component would be a PMIC - Power Management ICs component. A FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR regulator is the type of regulator that is used for this device. As part of the -- Series, this IC voltage regulator belongs to that category. Whenever the temperature is less than 125°C, it is recommended that you use it. The chip is operated at a maximum operating temperature of -40°C.