Enable, Power On Reset Fixed 0.5 mm MIC2214 PMIC -- Series 10 10-VFDFN Exposed Pad, 10-MLF®
A Tape & Reel (TR) case is used to deliver this IC regulator. This voltage regulator IC comes in a 10-VFDFN Exposed Pad, 10-MLF® case. Output type Fixed. This component features 2 Voltage regulators. As a result of the Linear Voltage Regulator's design, the operating temperature of Surface Mount can be adjusted within a specified range. There is a temperature range of -40°C~125°C degrees during operation of the IC regulator. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. In terms of its current output, it is able to supply 150mA, 300mA. A total of 10 pins can be found on the board. In order to deliver prompt, sufficient and reliable performance, this regulator IC has 2 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. There are 10 pins on the chip. As an FYI, this IC voltage regulator has the basic part number MIC2214. An example of such a component would be this PMIC - Power Management ICs component. This device is regulated with the FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR type of regulator. This model is a part of the -- Series and is of high quality. If the temperature is below 125°C, it is recommended that you utilize this feature. It is recommended that the chip be operated at a temperature no lower than -40°C operating temperature.