4.5V~32V 12-Pin MIC2199 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver
It comes in a 12-VFDFN Exposed Pad, 12-MLF® package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~32V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 300kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12 V volts. MIC2199 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 12 pins. Switching converter is a special type of PMIC - Power Management ICs. As determined by the test statistics, the output voltage of DC regulator is 800mV. You should note down the dc dc regulator's usual output current of 20A when you start a project. A duty cycle set at 85 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 6 V so that the need can be met more directly. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 2.7, 5.5 V. Keep dc regulator at a temperature of -40°C or above. Running the machine at 125°C is ideal. -- is a series of dc to dc voltage regulator. Switch converter has 1 total function(s). It is designed to have voltage regulators switchings with 12 pins. Its supplier dc dc controller package would be 12-MLF™ (4x4). DC switcher will not be able to provide an output current above 20A volts. Switching with 1 phases is the property of this controller. The maximum frequency of this controller is 330 kHz. Switching controller's ambient temperature is limited to 125C degrees. A temperature of -40C should be recorded at the bottom of the dc to dc voltage regulator.