MIC2186YQS-TR Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 2.9V~14V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 100kHz 200kHz 400kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. A search for "MIC2186" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 440kHz. Switching controller operates at 440kHz Hz. A temperature -40°C lower than -40°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. Supplier dc dc controller package for this part is 16-QSOP. With this controller, the phase is 1. Voltage is rated 14V for maximum supply.
MIC2186YQS-TR Features
Transistor Driver Outputs
Switching Frequency: 100kHz 200kHz 400kHz
Enable, Frequency Control, Soft Start
Max Duty Cycle: 85 %
Frequency: 440kHz
MIC2186YQS-TR Applications
There are a lot of Microchip Technology
MIC2186YQS-TR DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery