2.9V~14V 16-Pin MIC2186 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 100kHz 200kHz 400kHz Transistor Driver
It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.9V~14V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 100kHz 200kHz 400kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 5 V. MIC2186 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically PMIC - Power Management ICs. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 85 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 440kHz is the maximum frequency of this dc regulators. 440kHz is the frequency of the switching controller. For better satisfaction, the value of DC to DC voltage regulator is ALSO REQUIRES A 2.82V TO 3.18V DIGITAL SUPPLY VOLTAGE. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. A dc to dc voltage regulator in the -- series, it belongs to this family. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 16 pins is one of the most important aspects of the process. A supplier dc dc controller package of 16-SOIC would be used for this part. This controller contains 1 phases. In this controller, the top frequency is 440 kHz. A maximum supply voltage of 14V is specified.