2.9V~14V 16-Pin MIC2184 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 400kHz Transistor Driver

It comes in the 16-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 2.9V~14V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 400kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 5 V. MIC2184 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically PMIC - Power Management ICs. Statistically, DC regulator outputs 12V volts. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 400kHz is the frequency of the switching controller. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 1.3 TO 12 V. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 2.9, 14 V. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. A dc to dc voltage regulator in the -- series, it belongs to this family. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 16 pins is one of the most important aspects of the process. A supplier dc dc controller package of 16-SOIC would be used for this part. With a current supply of 1mA, it runs. This controller contains 1 phases. In this controller, the top frequency is 440 kHz. A maximum supply voltage of 14V is specified. In most cases, this controller will perform well at frequency 400 kHz.