4.5V~32V 16-Pin MIC2182 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver
It comes in a 16-SSOP (0.209, 5.30mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~32V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 300kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15 V volts. MIC2182 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of PMIC - Power Management ICs. As determined by the test statistics, the output voltage of DC regulator is 5V. You should note down the dc dc regulator's usual output current of 20mA when you start a project. A duty cycle set at 86 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 330kHz. Keep dc regulator at a temperature of -40°C or above. Running the machine at 85°C is ideal. -- is a series of dc to dc voltage regulator. Switch converter has 1 total function(s). Its supplier dc dc controller package would be 16-SSOP. Switching with 1 phases is the property of this controller. The maximum frequency of this controller is 330 kHz. According to its maximum supply voltage rating, the voltage controller is rated 32V. 330 kHz is the frequency at which this controller performs well most of the time.