4.5V~75V 10-Pin MIC2176 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 300kHz Transistor Driver
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A DC switcher's nominal voltage of 48 V is input. Searching "MIC2176" will return other relevant dc to dc converter ics. 10 pins are on switching converter. There is a particular type of PMIC - Power Management ICs in switching converter. Based on the test statistics, DC regulator outputs voltage 800mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 89 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 375kHz on this dc regulators. This value is ALSO OPERATES IN ADJUSTABLE MODE DOWN TO 0.8 V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 4.5, 16.5 V to ensure safety and reliability. Temperatures should be kept at -40°C or higher. There should be 125°C more than 125°C degrees Celsius in the machine. Hyper Speed Control® series dc to dc voltage regulator belong to this series. Total number of functions (s) for thare switch converters are 1. There is a design for voltage regulators switching with 10 pins. There is 10-MSOP dc dc controller package associated with this part. DC switchers cannot produce output currents greater than 15A. Phases of this controller are 1. 375 kHz is the switching controller's maximum switching frequency.