3V 8-Pin MIC2172 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 100kHz Tape & Reel (TR) 1.25A (Switch) 8-SOIC (0.154, 3.90mm Width)

Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 8-SOIC (0.154, 3.90mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On its output pins, this adjusting voltage regulator generates Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 100kHz. Regulator 3V can operate with dc to dc voltage regulator's minimum input voltage 3V. There is a adjusting voltage regulator's voltage output (Min/Fixed) of 1.24V. DC DC switching regulator's maximum design flexibility comes from its output current of 1.25A (Switch). Voltage regulator's input voltage can reach 40V. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 5 V. There is a subcategory of this regulator voltage called PMIC - Power Management ICs. MIC2172 is a family of voltage regulators that belong to the DC/DC industry. Voltage regulator is capable of giving voltage at 65V volts. In order to operate voltage regulator, 8 pins are required. This voltage regulator 12v should be configured with an output voltage that is at least 1.24V. For switching regulator maximum operation, dc to dc voltage regulator delivers 1.25A A. The maximal output voltage of 65V (Switch) allows DC DC switching regulator to be operated easily. The maximum switching frequency of the regulator is 115 kHz, which is used to operate it. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 65V. This 12 volt voltage regulator has an output current of 3.5 A A at the top of the range. A switching DC-DC regulator, it is a member of the -- family of electronic voltage regulator 12vs. Stable operation of switching regulator is possible because of the high operating temperature 85°C limit. The voltage regulator 12v must operate at a minimum operating temperature of -40°C in order to remain reliable. The voltage regulator 12v supports a dc to dc voltage regulator's minimum input voltage of 3V for its input. 40V input voltage can be sustained by this voltage regulator 12v. As long as the supply voltage is greater than 40V, the voltage regulator 12v will operate correctly. It is possible to set the dc to dc voltage regulator's minimum input voltage to 3(V) with this voltage regulator dc to dc. A total of 8 pins are present on this voltage regulator dc to dc. In normal circumstances, 1.25 A are the output current of DC DC switching regulator.