3V~14.5V 10-Pin MIC2169 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 3V~14.5V and has a 3V~14.5V supply voltage. Worked in a -40°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 4.5 V is input. Searching "MIC2169" will return other relevant dc to dc converter ics. 10 pins are on switching converter. There is a particular type of PMIC - Power Management ICs in switching converter. Based on the test statistics, DC regulator outputs voltage 800mV. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 92 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 550kHz on this dc regulators. This value is ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.8V so that DC to DC voltage regulator better serves the purpose. Temperatures should be kept at -40°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. -- series dc to dc voltage regulator belong to this series. Total number of functions (s) for thare switch converters are 1. There is a design for voltage regulators switching with 10 pins. There is 10-MSOP-EP dc dc controller package associated with this part. Phases of this controller are 1. 550 kHz is the switching controller's maximum switching frequency. Maximum supply voltage is 14.5V.