MIC2164-3YMM Overview
This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. 3V~28V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Enable is used for efficient switching control in the dcdc regulator. You can find other relevant dc to dc converter ics by searching "MIC2164". There are only 10 pins on switching converter. DC regulator outputs 5.5V voltage according to the test statistics. normally, the dc dc regulator's output current is 25A, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 33 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 1.25MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. A temperature of -40°C or higher is recommended. A temperature of 125°C degrees Celsius is recommended. Thare are switch converters of the Hyper Speed Control® series. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. It would be 10-MSOP for this part's supplier dc dc controller package. The supply voltage must be 3V. As per its datasheet, the switching converter has a maximum output of 5.5V volts. A supply current of 1.4mA is used to power it. Switches with 1 phases are used in this controller. If the current exceeds 3mA, the component may not operate correctly and may even be damaged.
MIC2164-3YMM Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable
Max Duty Cycle: 33 %
MIC2164-3YMM Applications
There are a lot of Microchip Technology
MIC2164-3YMM DC to DC converter applications.
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment