8V~40V 16-Pin MIC2131 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 400kHz Transistor Driver

As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 8V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 400kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24 V. A search for "MIC2131" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular PMIC - Power Management ICs of switching converter. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 440kHz. DC to DC voltage regulator has the value of ALSO HAS ADJUSTABLE OUTPUT VOLTAGES DOWN TO 0.7V to better satisfy the requirement. A temperature -40°C lower than -40°C should be maintained. A temperature of 125°C more than 125°C degrees Celsius should be maintained in the undc regulator. There are several dc to dc voltage regulator in the -- series. In total, thare switch converters have 1 functions. Supplier dc dc controller package for this part is 16-eTSSOP. With this controller, the phase is 1. This controller can operate at a frequency up to 440 kHz. Voltage is rated 40V for maximum supply. The frequency at which this controller generally works well is 440 kHz.