16 Terminals 4.5V~75V MIC2127A DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 200kHz~800kHz Transistor Driver

This switching controller fits most application requirements since it is packaged in a 16-VFQFN Exposed Pad package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 4.5V~75V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 200kHz~800kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. -- is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 16 of dc switching. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "MIC2127A". In particular, switching converter belongs to the PMIC - Power Management ICs family. dc dc voltage regulators should have a minimum input voltage of 4.5V. DC regulator outputs 5.1V voltage according to the test statistics. The dc to dc regulator can only accept a maximum input voltage of 75V. normally, the dc dc regulator's output current is -, which you should keep in mind when starting a project. The value of DC to DC voltage regulator is set to SEATED HT-CALCULATED in order to better satisfy the requirement. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 4.5 V to 75 V. Thare are switch converters of the Hyper Speed Control® series. A total of 1 functions are present in the switch converters. It would be 16-QFN (3x3) for this part's supplier dc dc controller package. 1.8 mA more than 1.8 mA current should be supplied to the controller. A supply current of 1.4 mA is used to power it. The top frequency at which this switching controller can switch is 800 kHz. This controller performs best at a frequency of 800kHz. 30V represents the highest voltage output of the dc controller.