MIC2104YML-TR Overview
With its 16-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Cut Tape (CT) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 200kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good. Searching "MIC2104" will return other relevant dc to dc converter ics. 16 pins are on switching converter. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 85 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Temperatures should be kept at -40°C or higher. There should be 125°C more than 125°C degrees Celsius in the machine. Hyper Speed Control® series dc to dc voltage regulator belong to this series. There is 16-MLF® (3x3) dc dc controller package associated with this part. Phases of this controller are 1. Maximum supply voltage is 75V.
MIC2104YML-TR Features
Transistor Driver Outputs
Switching Frequency: 200kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good
Max Duty Cycle: 85 %
MIC2104YML-TR Applications
There are a lot of Microchip Technology
MIC2104YML-TR DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
