MIC2076A-2YM-TR Overview
The LED driver's packaged as a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.This object belongs to the MIC2076A family.The LED driver has 1 functions.Its maximum output voltage is 1.25AV.The maximum output current drops to 500mA in order to meet the operation criteria.This electrical component is included in the - series.A self-contained LED driver with a capacity of Switch ICs is contained in an econtainer.The maximum supply voltage is set to 5.5 V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7 V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.In order to maximize efficiency, the supply voltage should be set at 2.7 V to 5.5 V.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.This electrical component is classified as High Side Current Limit.
MIC2076A-2YM-TR Features
2 channels
MIC2076A-2YM-TR Applications
There are a lot of Microchip Technology
MIC2076A-2YM-TR Power Switches ICs applications.
- Portable GPS Device
- Set-top-box
- USB Power Distribution
- Notebook PC
- Telecom and Network Systems
- PC Card Hot Swap
- Storage Drives
- Portable/Handheld Devices
- Wireless/Networking Cards
- Low Voltage I/O System Power