N-Channel 0.65 mm PMIC MM8™ Series MIC2075 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

As you can see, it's packaged in the way of a Tube.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2075 family.In order to operate, 8 pins are used.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 500mA volts.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.The LED driver has a total of 8 pins.These electrical components are part of the MM8™ series.The maximum supply voltage for this LED driver is 5.5 V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.7 V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.A maximum operating temperature of 85°C°C is required to provide stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.