MIC2043-2YM Overview
It is packaged in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of 1.6V~5.5V, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.As you can see, it comes from the MIC2043 family.During operation, the 8 pins are used.From the lighting driver, there is a maximum output of 3AV.To comply with the operation criteria, the maximum output current is reduced to 3A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 60mOhm resistance in the LED driving board.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a maximum voltage of 5.5VV.It can also be used at 1.6Vvolts if needed.
MIC2043-2YM Features
Resistance of 60mOhm
MIC2043-2YM Applications
There are a lot of Microchip Technology
MIC2043-2YM Power Switches ICs applications.
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Hard Disk Drives
- Solid-State Drives
- Hot Swap
- HDD and SSD
- Hot Swap
- Wireless Modem Data Cards
- PC Cards
- HDD, SSD